linux manpages
{"type":"documentation"}

guestfs-testing

Section: Virtualization Support (1)
Updated: 2012-06-22
Index Return to Main Contents
 

NAME

guestfs-testing - manual testing of libguestfs, you can help!  

DESCRIPTION

This page has manual tests you can try on libguestfs. Everyone has a slightly different combination of platform, hardware and guests, so this testing is very valuable. Thanks for helping out!

These tests require libguestfs ≥ 1.14.

Tests marked with a * (asterisk) can destroy data if you're not careful. The others are safe and won't modify anything.

You can report bugs you find through this link:

https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

or post on the mailing list (registration is not required, but if you're not registered then you'll have to wait for a moderator to manually approve your message):

https://www.redhat.com/mailman/listinfo/libguestfs  

TESTS

 

Check KVM acceleration is being used.

If your host has hardware virt acceleration, then with a hot cache libguestfs should be able to start up in a few seconds. Run the following command a few times: 

 time guestfish -a /dev/null run

After a few runs, the time should settle down to a few seconds (under 5 seconds on fast 64 bit hardware).

How to check for hardware virt:

http://virt-tools.org/learning/check-hardware-virt/

If the command above does not work at all, use libguestfs-test-tool(1).  

Run virt-alignment-scan on all your guests.

Run virt-alignment-scan(1) on guests or disk images: 

 virt-alignment-scan -a /path/to/disk.img

or: 

 virt-alignment-scan -d Guest

Does the alignment report match how the guest partitions are aligned?  

Run virt-cat on some files in guests.

virt-cat(1) can display files from guests. For a Linux guest, try: 

 virt-cat LinuxGuest /etc/passwd

A recent feature is support for Windows paths, for example: 

 virt-cat WindowsGuest 'c:\windows\win.ini'

An even better test is if you have a Windows guest with multiple drives. Do "D:", "E:" etc paths work correctly?  

* Copy some files into a shut off guest.

virt-copy-in(1) can recursively copy files and directories into a guest or disk image. 

 virt-copy-in -d Guest /etc /tmp

This should copy local directory "/etc" to "/tmp/etc" in the guest (recursively). If you boot the guest, can you see all of the copied files and directories?

Shut the guest down and try copying multiple files and directories: 

 virt-copy-in -d Guest /home /etc/issue /tmp
 

Copy some files out of a guest.

virt-copy-out(1) can recursively copy files and directories out of a guest or disk image. 

 virt-copy-out -d Guest /home .

Note the final space and period in the command is not a typo.

This should copy "/home" from the guest into the current directory.  

Run virt-df.

virt-df(1) lists disk space. Run: 

 virt-df

You can try comparing this to the results from df(1) inside the guest, but there are some provisos:

*
The guest must be idle.
*
The guest disks must be synched using sync(1).
*
Any action such as booting the guest will write log files causing the numbers to change.

We don't guarantee that the numbers will be identical even under these circumstances. They should be similar. It would indicate a bug if you saw greatly differing numbers.  

Try importing virt-df CSV output into a spreadsheet or database.

Run: 

 virt-df --csv > /tmp/report.csv

Now try to load this into your favorite spreadsheet or database. Are the results reproduced faithfully in the spreadsheet/database?

http://www.postgresql.org/docs/8.1/static/sql-copy.html http://dev.mysql.com/doc/refman/5.1/en/load-data.html  

* Edit a file in a shut off guest.

virt-edit(1) can edit files in guests. Try this command on a RHEL or Fedora guest: 

 virt-edit LinuxGuest /etc/sysconfig/network

On other Linux guests try editing other files such as: 

 virt-edit LinuxGuest /etc/motd

Are the changes seen inside the guest when it is booted?  

Display the filesystems / partitions / LVs in a guest.

virt-filesystems(1) can be used to display filesystems in a guest. Try this command on any disk image or guest: 

 virt-filesystems -a /path/to/disk.img --all --long -h

or: 

 virt-filesystems -d Guest --all --long -h

Do the results match what is seen in the guest?  

Run virt-inspector on all your guests.

Use virt-inspector(1) to get a report on all of your guests or disk images: 

 virt-inspector -a /path/to/disk.img | less

or: 

 virt-inspector -d Guest | less

Do the results match what is actually in the guest?  

Try the auditing features of virt-ls on all your guests.

List all setuid or setgid programs in a Linux virtual machine: 

 virt-ls -lR -d Guest / | grep '^- [42]'

List all public-writable directories in a Linux virtual machine: 

 virt-ls -lR -d Guest / | grep '^d ...7'

List all Unix domain sockets in a Linux virtual machine: 

 virt-ls -lR -d Guest / | grep '^s'

List all regular files with filenames ending in '.png': 

 virt-ls -lR -d Guest / | grep -i '^-.*\.png$'

Display files larger than 10MB in home directories: 

 virt-ls -lR -d Guest /home | awk '$3 > 10*1024*1024'

Find everything modified in the last 7 days: 

 virt-ls -lR -d Guest --time-days / | awk '$6 <= 7'

Find regular files modified in the last 24 hours: 

 virt-ls -lR -d Guest --time-days / | grep '^-' | awk '$6 < 1'

Do the results match what is in the guest?  

Create a disk image from a tarball.

Use virt-make-fs(1) to create a disk image from any tarball that you happen to have: 

 virt-make-fs --partition=mbr --type=vfat /any/tarball.tar.gz output.img

Add 'output.img' as a raw disk to an existing guest. Check the guest can see the files. This test is particularly useful if you try it with a Windows guest.

Try other partitioning schemes, eg. --partition=gpt.

Try other filesystem formats, eg. --type=ntfs, --type=ext2.  

* Run virt-rescue on a shut off disk image or guest.

Use virt-rescue(1) to examine, rescue or repair a shut off guest or disk image: 

 virt-rescue -a /path/to/disk.img

or: 

 virt-rescue -d Guest

Can you use ordinary shell commands to examine the guest?  

* Resize your guests.

Use virt-resize(1) to give a guest some more disk space. For example, if you have a disk image that is smaller than 30G, increase it to 30G by doing: 

 truncate -s 30G newdisk.img
 virt-filesystems -a /path/to/olddisk.img --all --long -h
 virt-resize /path/to/olddisk.img newdisk.img --expand /dev/sda1
 qemu-kvm -m 1024 -hda newdisk.img

Does the guest still boot? Try expanding other partitions.  

* Sparsify a guest disk.

Using virt-sparsify(1), make a disk image more sparse: 

 virt-sparsify /path/to/olddisk.img newdisk.img

Is "newdisk.img" still bootable after sparsifying? Is the resulting disk image smaller (use "du" to check)?  

* sysprep a shut off Linux guest.

Note that this really will mess up an existing guest, so it's better to clone the guest before trying this. 

 virt-sysprep --hostname newhost.example.com -a /path/to/disk.img

Was the sysprep successful? After booting, what changes were made and were they successful?  

Dump the Windows Registry from your Windows guests.

Use virt-win-reg(1) to dump out the Windows Registry from any Windows guests that you have. 

 virt-win-reg --unsafe-printable-strings WindowsGuest 'HKLM\Software' |
   less

 virt-win-reg --unsafe-printable-strings WindowsGuest 'HKLM\System' |
   less

Does the output match running "regedit" inside the guest?

A recent feature is the ability to dump user registries, so try this, replacing username with the name of a local user in the guest: 

 virt-win-reg --unsafe-printable-strings WindowsGuest 'HKEY_USERS\username' |
   less
 

SEE ALSO

guestfs(3), guestfish(1), guestfs-examples(3), <http://libguestfs.org/>.  

AUTHORS

Richard W.M. Jones ("rjones at redhat dot com")  

COPYRIGHT

Copyright (C) 2011 Red Hat Inc. <http://libguestfs.org/>

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

 

Index

NAME
DESCRIPTION
TESTS
Check KVM acceleration is being used.
Run virt-alignment-scan on all your guests.
Run virt-cat on some files in guests.
* Copy some files into a shut off guest.
Copy some files out of a guest.
Run virt-df.
Try importing virt-df CSV output into a spreadsheet or database.
* Edit a file in a shut off guest.
Display the filesystems / partitions / LVs in a guest.
Run virt-inspector on all your guests.
Try the auditing features of virt-ls on all your guests.
Create a disk image from a tarball.
* Run virt-rescue on a shut off disk image or guest.
* Resize your guests.
* Sparsify a guest disk.
* sysprep a shut off Linux guest.
Dump the Windows Registry from your Windows guests.
SEE ALSO
AUTHORS
COPYRIGHT
This document was created by man2html, using the manual pages.
Time: 05:29:04 GMT, December 24, 2015