iscsiuio

Section: Maintenance Commands (8)
Updated: 03/05/2012
Index Return to Main Contents

NAME

iscsiuio - iSCSI UserSpace I/O driver

SYNOPSIS

iscsiuio [-d-f-v]

DESCRIPTION

iscsiuio is the UserSpace I/O driver for the Broadcom NetXtreme II BCM5706/5708/5709 series PCI/PCI-X Gigabit Ethernet Network Interface Card (NIC) and for the Broadcom NetXtreme II BCM57710/57711/57712/57800/57810/57840 series PCI-E 10 Gigabit Ethernet Network Interface Card. The driver has been tested on 2.6.28 kernels and above.

Refer to the README.TXT from the driver package on how to compile and install the driver.

Refer to various Linux documentations on how to configure network protocol and address.

DRIVER DEPENDENCIES

PARAMETERS

There are very few parameters when running this application.

-d<debuglevel>

This is to enable debug mode where debug messages will be sent to stdout The following debug modes are supported

: DEBUG 4 - Print all messages INFO 3 - Print messages needed to follow the uIP code (default) WARN 2 - Print warning messages ERROR 1 - Only print critical errors


-f: This is to enable forground mode so that this application doesn't get sent into the background.

-v: This is to print the version.

AUTHOR

Benjamin Li - benli@broadcom.com Eddie Wai - eddie.wai@broadcom.com

This document was created by man2html, using the manual pages.
Time: 05:34:26 GMT, December 24, 2015