LVSCAN

Section: Maintenance Commands (8)
Updated: LVM TOOLS 2.02.95(2)-RHEL6 (2012-10-16)
Index Return to Main Contents
 

NAME

lvscan - scan (all disks) for Logical Volumes  

SYNOPSIS

lvscan [-a|--all] [-b|--blockdevice] [-d|--debug] [-h|--help] [--ignorelockingfailure] [-P|--partial] [-v|--verbose]  

DESCRIPTION

lvscan scans all known volume groups or all supported LVM block devices in the system for defined Logical Volumes. The output consists of one line for each Logical Volume indicating whether or not it is active, a snapshot or origin, the size of the device and its allocation policy. Use lvs(8) or lvdisplay(8) to obtain more-comprehensive information about the Logical Volumes.  

OPTIONS

See lvm for common options.
--all
Include information in the output about internal Logical Volumes that are components of normally-accessible Logical Volumes, such as mirrors, but which are not independently accessible (e.g. not mountable). For example, after creating a mirror using 'lvcreate -m1 --mirrorlog disk', this option will reveal three internal Logical Volumes, with suffixes mimage_0, mimage_1, and mlog.
-b, --blockdevice
This option is now ignored. Instead, use lvs(8) or lvdisplay(8) to obtain the device number.
 

SEE ALSO

lvm(8), lvcreate(8), lvdisplay(8) lvs(8)


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 05:34:27 GMT, December 24, 2015