PETHTOOL
Section: [FIXME: manual] (8)Updated: 07/19/2011
Index Return to Main Contents
NAME
pethtool - Display or change ethernet card settingsSYNOPSIS
pethtool [OPTIONS] [<INTERFACE>]
DESCRIPTION
This script mimic ethtool behavior, but is written purely in python and python module ethtool.
OPTIONS
INTERFACE
- Is the name of the ethernet device on which pethtool should operate.
-h, --help
- Show help message and exit.
-c|--show-coalesce
- Show coalesce options
-C|--coalesce
-
Set coalesce options
-
adaptive-rx on|off adaptive-tx on|off rx-usecs N rx-frames N rx-usecs-irq N rx-frames-irq N tx-usecs N tx-frames N tx-usecs-irq N tx-frames-irq N stats-block-usecs N pkt-rate-low N rx-usecs-low N rx-frames-low N tx-usecs-low N tx-frames-low N pkt-rate-high N rx-usecs-high N rx-frames-high N tx-usecs-high N tx-frames-high N sample-interval N
-
-i|--driver
- Show driver information
-k|--show-offload
- Get protocol offload information
-K|--offload
-
Set protocol offload
- [ tso on|off ]
SEE ALSO
ethtool(8)
AUTHORS
Arnaldo Carvalho de Melo <acme@redhat.com>
Man page written by Miroslav Suchý <msuchy@redhat.com>
Index
This document was created by man2html, using the manual pages.
Time: 05:34:28 GMT, December 24, 2015